Pool Under water Lightning
Hayward Eurolite Underwater Pool Light SP0512L
Hayward Eurolite Underwater Pool Light SP0512L – This industry leading 300w Par56 sealed beam pool light has been engineered to give years of trouble free operation & easy servicing.
Comes complete with light guts, cable, wall niche & liner clamp plates, gaskets & screws.
Add the SCP tranformer & Deck box to complete the installation
Certikin PU9 Light Replacement Guts Pack
Certikin PU9 Guts Pack Kits – These replacement 300w guts packs allow you to simple pull out your old light & cable & replace with a whole new assembly.
Can be carried out with the pool still full of water, comes complete with full manufacturers instructions.
Normally the 2.8m cable length pack is usually long enough if your deck box is pool side. The longer packs are normally used in non-domestic installations where the lights are centrally run back to a bank of transformers.
Certikin PU6 Quick Change Pool Light - Liner
A revolution in underwater lighting design, the bulb in a PU6 Quick Change Underwater light is held in place by a threaded ring without the need for fixing screws.
This unique design enables speedy maintenance and bulb changing with no special tools required.
For ease of installation the niche can be fitted with a puddle flange (no leak flange) for concrete spas
Swimming Pool Light Transformers
Swimming Pool Light Transformers – Various Industry standard tranformers – please ensure you choose the right transformer for your lighting load.
Please find below the specific outputs for the transformers, please not that the max lighting load can be shared between multiple lamps, so for instance the Certikin
1 – PU11120TY – 120VA – Safety Transformer – Max Lighting Load 100 Watts – (LED)
2 – PU11350TY – 350VA 12v Safety Transformer – Max Lighting Load 260 Watts ( Multiple LED)
3 – PU11H – 120VA 12v IP65 Transformer – Max Lighting Load 100 Watts – (LED)
4 – PU11060 – 60VA Transformer – Max Load 40 Watts – Ideal for Spas – (Spa LED)
5 – TTL-30 – 300W 12v Transformer SCP – Max Lighting Load 300 Watts – (Sealed Beam)
6 – PU11S – 400VA – 300W 12V – Max Lighting Load 300 Watts – (Sealed Beam)
7 – SL600TC – Isolating Speaker Transformer – Used with the Underwater speaker (SL600UC) – one per speaker.
Swimming Pool Light Bulb - Halogen 100w 12v
Swimming Pool Light Bulb – 100w 12v – These high quality 100 watt lamps are an ideal replacement lamp.
Please ensure you do not touch the lamp with bare skin during replacement.
Hayward Concrete Swimming Pool Light
Hayward Concrete Underwater Pool Light SP0512C – This industry leading 300w Par56 sealed beam pool light has been engineered to give years of trouble free operation & easy servicing.
Comes complete with light guts, cable, wall niche & cover plates & screws.
Add the SCP tranformer & Deck box to complete the installation
Pool Heating Pumps
Hydro-S Eco Swimming Pool Heat Pumps
Hydro-S Eco Swimming Pool Heat Pumps are extremely efficient and economical and a very cost effective way of heating your pool.
These heat pumps are ideal for a Summer (May to September) season of pool heating, and come with an comprehensive on site 2 year
Hydro-S Heat pump is ideal for above ground & inground pools
Hydro-S Inverter Heat Pumps 4 - 14.6kw
The Hydro-S Inverter heat pump offers the ability to vary the heating capacity to suit weather conditions. Using the new automated Power/Smart/Silent modes, the compressor and fan speeds can be varied to reduce noise levels & energy consumption by up to 50%
Hydro-S Heat pumps only come in single phase 230V, and are all horizontal discharge air – extended season ( all year round).
Hydro Pro Swimming Pool Heat Pumps 18 - 26kw
The Hydropro Swimming Pool Heat Pumps are extremely efficient and economical and a very environmentally friendly way of heating your pool.
Hydro-Pro Heat pump 230V type 18, 22. 26 Verticle discharge air – extended season ( all year round). & Hydro-Pro Heat pump 400V type 22T 26T Verticle discharge air – extended season ( all year round)
Calorex Pro-Pac Extended Season Heat Pumps
The Calorex ‘X’ Range are purpose designed for outdoor swimming pools. The Extended Season Models can work in air teperatures down to +7 Degree’s Centigrade, achieving greater heat gain into your pool water for a far longer season of swimming. April – October.They are highly efficient with a wound tube in tube Titanium condenser and come with a rotary or scroll compressor and water flow switch
Pool Heat Exchangers
Stainless Steel Heat Exchanger
Made from 316 grade stainless steel, these heat exchangers are ideal for pool use. They allow you to utilise your existing house boiler to heat your pool.
Specifications:
- Ideal for installation on a household heating system.
- 316 Grade high quality stainless steel. Not Suitable for use with Saltwater Pools
Built in 0.5″ thermostat probe pocket. - 28mm Male LPHW Connections.
Pre-Drilled fixings allow for floor or wall mounting. - 1 1/2″ Male Pool water connections.
- Ideally should be installed with swimming pool composite brass/ABS unions due to the high temperatures applied to the thread.
Bowman Heat Exchanger
Bowman is one of the UK’s largest manufacturers of swimming pool heat exchangers. Bowman swimming pool heat exchangers are manufactured with cupro-nickel tubes which will normally well outlast stainless steel ones.
The highly corrosion resistant cupro-nickel tubes enable the heat exchanger to be used in chlorine water, seawater or therapeutic and spa pools
Bowman Solar Heat Exchangers
This new solar heat exchanger has been designed to allow the lower temperatures generated from closed loop lphw solar systems to be transfered in a fast and efficient means via this longer than usual exchanger.
The greater surface area maximises heat transfer for a longer transfer period of flow. This new solar heat exchanger also comes with solvent weld connections direct to the pool water flow pipework, an integrated small digital thermostat pocket provided as standard.
LAE Digital Thermostat
Certikin Digital Thermostat
Digital Thermostat allows for precise temperature control coupled with great reliability. Requires either a small stat pocket or should be bought with stainless steel probe pocket and threaded bung, complete with 2m long probe.
Set up & Calibration:
Instructions for calibrating a LAE Thermostat.
With power off, hold Up & Down arrows down & power up, PAR will be displayed. Press Up button & TYP will show, then press set & this will show Press Set.
Press Up button & USP will show, press set & then the Up button you can skip through all other parameters when you reach HY1. Press set, then down to -01, and then press set.
Press HYS button & lower to -01. Press set, then press set again, L1 will be shown. Set the desired temperature & then press set.
Elecro Poolsmart Controller
Control your pool heating system and maintain the perfect pool temperature with the latest version of the Poolsmart. The Poolsmart Plus features a digital touch screen display, allowing you to control the functions at a touch of a finger. BMS (Building System Management) Ready – easily integrate the controller to communicate with your BMS system.
The Priority Heating function allows the controller to override the circulation pumps time clock, switching it on, allowing the heating appliance to heat the water to the required temperature, the controller will then switch the circulation pump off; ensuring your pool is always maintained at the perfect temperature.
Features:
Digital Touch Screen Display
BMS Integration Ready
Priority Heating
Accurate Temperature Control to 0.5ºC
Diagnostic Display
Calibrated Dial Thermostat
Calibrated Dial Thermostat allows for precise temperature control cut off coupled with the analogue display of the current water temperature. Requires either a small stat pocket or should be bought with Brass 1/2″ Threaded probe pocket and threaded bung as illustrated.
Pool Ladders
Certikin 1.5" / 38mm Liner Pool Ladder
Certikin 1.5″ / 38mm Liner Pool Ladder – please see larger image for further product information..
The Certikin 1.5″ ladder is supplied in 304 grade stainless steel and are supplied with pinch anchors and ABS treads as standard.
A bolt set is 2 x bolts plus 2 x washers & 2 x Nuts, so for a 3 tread ladder you would need 3 bolt sets.
The pinch anchors are designed to be used in all the 1.5″ / 38mm ladders apart from the undercover & naturaline which already have flange fixings & bolts.
Important – It is strongly recommended that ladders are inspected at regular intervals to ensure safety of users.
Certikin 1.5" / 38mm Concrete Pool Ladder
Certikin 1.5″ / 38mm Concrete Pool Ladder – please see larger image for further product information..
The Certikin 1.5″ ladder is supplied in 304 grade stainless steel and are supplied with pinch anchors and ABS treads as standard.
A bolt set is 2 x bolts plus 2 x washers & 2 x Nuts, so for a 3 tread ladder you would need 3 bolt sets.
The pinch anchors are designed to be used in all the 1.5″ / 38mm ladders apart from the undercover & naturaline which already have flange fixings & bolts.
Important – It is strongly recommended that ladders are inspected at regular intervals to ensure safety of users.
Certikin 1.5" / 38mm Replacement Ladder Treads
Certikin 1.5″ / 38mm Replacement Ladder Treads – please see larger image for further product information.
A bolt set is 2 x bolts plus 2 x washers & 2 x Nuts, so for a 3 tread ladder you would need 3 bolt sets.
Important – It is strongly recommended that ladders are inspected at regular intervals to ensure safety of users.
Certikin 1.5″ ABS tread dimensions are:
Overall length – 477mm
Curve to Curve – 443mm
Curve diameter – 37mm
Widths – End Width – 73mm – Middle Width – 80mm
Thickness – End – 26mm – Middle – 38mm
