Astral Pumps
Astral Victoria Plus New Generation 3 phase pumps
Astral Victoria Plus 3 Phase
The Astral Victoria plus pump is a robust design with an easy to use locking ring on the lid of the large capacity strainer basket.The Victoria Plus NG pump was introduced in 2017 and superseded the Victoria Plus, Victoria and Sprint ranges, and is interchangeable due to the use of the same pipe connections, and the same wet end body size and shape.
Astral Victoria Plus New Generation pumps 1ph
The Astral Victoria plus pump.
Robust design with an easy to use locking ring on the lid of the large capacity strainer basket. The Victoria plus NG pump was introduced in 2017 and superseded the Victoria Plus, Victoria and Sprint ranges, and is interchangeable due to the use of the same pipe connections, and the same wet end body size and shape.
Astral Sena Pumps
Astral Sena – Single Phase models.
The Sena pump sits nicely alongside the Victoria Plus pump in the Astral range. These are great little pumps, ideal for pools and ponds.
These pumps benefit from the following features
– 316 grade Stainless steel used on all parts in contact with water.
– Metric and Imperial unions included with each pump.
– Motor sizes from 1/3 to 1 1/4 HP in single and three phase
– IP55 Motor protection
Astral Alaska Pumps
Astral Alaska Plus Single phase pumps.
These are fantastic pumps from Astral, providing great performance and reliability that you can depend on. The BSP thread on both unions gives a super tight seal.
These have a plastic pump body, containing a large strainer basket with a clear perspex lid so you can easily see when this needs emptying.
HydroAir Pumps
Balboa HA440-NG Pumps - single speed model
This is the latest version of the hugely popular HA440 Magnaflow pumps which are found in many spas and hot-tubs. They have previously been available in a range of three different pump models using the name Hydroair Magnaflow.
Hydroair Magnaflow HA440 Pumps
The 440 pumps are found in many spas and hot-tubs. They have previously been available in a range of three different pump models in single and two-speed, with the single speed being offered for electric or pneumatic switching.
HydroAir HA460 Pumps
The HA 460 is found in many spa baths and hot-tubs, but there are a few models, so please check the details below, or contact us if you have a query.
These are great little pumps, with strong motors and compact design.
Hydroair HA400 Pumps
The HA 400 is found in many spa baths and hot-tubs, but there are a few models, so please check the details below, or contact us if you have a query.
These are great little pumps, with strong motors and compact design.
Hydroair Liquidus Pumps
The Liquidus range of pumps from Hydroair is here to suit a wide range of applications, including hot-tubs, swimming pools and ponds. Ideally suited to small to medium size pools and ponds, these pumps are also designed to be suitable for use with salt water so corrosion need not be an issue!
Certikin Pumps & Waterco
Certikin Aquaspeed pumps
The Certikin Aquaspeed pumps are excellent for both pool and spa applications.
They are self priming units, and suit fresh and salt water applications.
Features:
- – Clear lid for inspection of the pump basket
- – Secondary seal for added pump motor protection
- – 2″ Connection unions
- – 316 grade stainless steel mechanical seal
- – suitable for salt pools
- – hydraulically efficient impellor
- – single piece fibreglass pump body
- – UV stabilised and corrosion resistant body
– TUV approved
Certikin Swimflo HGS Pool Pump
These are well made swimming pool pumps that are well suited to use in family sized pools. The Swimflo plus is the latest model of HGS pumps.They use a compact design that runs efficiently with low noise levels, and are really easy to install.
Some key features of this pump
- Fresh and salt water suitable
- Noryl Impellor
- Stainless Steel Shaft
- Carbon Mechanical Seal
- IP55 rated motor
- 50mm connection (pumps up to and including 1.0HP)
- 64mm connection (pumps 1.5HP and upwards)
The clear lid on the strainer box makes it easy to check when the basket needs cleaning, and the thumb screws make it easy to remove
Waterco Aquamite
Here’s a great pump for your swimming pool or fish tank – the Aquamite. It is the most compact pump in the Waterco pump range, and is available from 0.33hp to 1.25hp.
Check these features:
- The pump’s impeller and diffuser design ensures maximum the hydraulic output with minimum turbulence.
- The efficient performance of this pump means shorter run times, so reducing operating costs.
- The pump body is manufactured using advanced plastic moulding techniques, forming a single piece strainer pot and volute for extra strength.
- An additional unique secondary seal protects the motor end-shield from any fluid contact, eliminating corrosion in this area of the pump.
Waterco Supastream Pumps - 1ph
Great performance and efficiency from these pumps!
An ideal pump for pools and ponds, or other small volume water features. They benefit from these key features –
- Good size filter basket with clear lid for easy inspection
- Quick connect unions
- High quality 316 stainless mechanical seal with carbon/graphite seal faces
- High performance, efficient motor
Secondary seal – for protection against water ingress to the motor
Submersible Pumps
Simer Submersible Pump
These are great submersible pumps, which can be used in very shallow water. They feature a 400 watt water cooled, oil filled motor to prevent overheating. You can easily connect your hose to these using the 1″ female thread, and stepped hose connector.
Features include –
* Water cooled, oil filled motor
* works in as little as 3mm water depth
* Aluminum pump body
* 400 watt, 230v power rating
Mega Stainless Steel Submersible Pump - External Float
These are great quality, robust submersible pumps, suitable for use in clean or dirty water conditions. They feature a choice in power output and feature a built in thermal cut-out. You can easily connect your hose to these using the 25/32mm stepped hosetail and a good quality stainless steel pipe clamp. They have a 1 1/2″ BSP female thread connection, so you can easilty connect other fittings to these pumps.
Features include –
* Suitable for dirty water
* External float switch
* Stainless Steel Pump body
* 550 watt or 750 watt, 230v power rating
Plastic Bodied 400w Submersible Pump - External Float
These are great submersible pumps, suitable for use in clean or dirty water conditions. They feature a 400 watt motor with built in thermal cut-out. You can easily connect your hose to these using the 25/32mm stepped hosetail and a good quality stainless steel pipe clamp.
Features include –
* Suitable for dirty water (not solids)
* 10 metre cable
* External float switch
* Plastic Pump body
* 400 watt, 230v power rating
